Insinkerator Garbage Disposal Troubleshooting

A garbage disposal insinkerator is one of the most important appliances in the kitchen. It helps maintain an odorless kitchen and eliminates food waste. Overtime, problems arise which are caused by different factors. Here are some garbage disposal insinkerator issues you can fix by yourself.

Garbage Disposal Reset Button Does Not Work.

Most of the time, resetting the overload button is needed to clear a garbage disposal jam. Sometimes, though this button trips. If you notice that the red reset button has dropped down at least 5mm, this is a sign that the button is not working.

Step 1: Check the circuit breaker panel. Locate the circuit breaker specific to the garbage disposal and turn it off and turn it back on to reset the breaker.

Step 2: Go back to the where the garbage disposal is located to check the button remains pushed to the disposal. Turn on the garbage disposal power and let running water flow. This should keep your unit working. If after resetting the button again does not solve the problem, the wall switch should be checked.

Step 3: Get a non-contact voltage detector while the wall switch is on to check the voltage of electricity supplied to the unit. You should hear a beep and a flashing light to ensure there is electricity. Do the same with the outlet under the sink connected to the garbage disposal. If beep and flashing are absent, you might need to replace the wall switch.

Garbage Disposal Is Jammed.

Step 1: Ensure that the garbage disposal switch is turned off and the garbage disposal plug form the wall outlet is not connected.

Step 2: Using the garbage disposal wrench of a hex head wrench with the appropriate size, insert it on the hole at the bottle of the insinkerator and rotate it clockwise and counterclockwise to remove the jam.

Step 3: With a broom handle or a plunger handle, reach for the garbage disposal from the drain located in the sink. Rotate the grinding plate by using the end of the wooden handle to release the jam. If there is a grinding wall in your insinkerator, rotate this part of the disposal.

Step 4: With the wrench you have used earlier, double check if the problem is already solved.

Step 5: Replace the plug and turn the garbage disposal insinkerator as well as the sink faucet to let water flow.

Step 6: At the bottom of the insinkerator unit, push the red reset button.

Glass Stuck Inside The Garbage Disposal Insinkerator.

Step 1: Ensure to prevent getting electrocuted by turning off the switch of the garbage disposal and remove the plug from the wall outlet. Conversely, if the disposal is connected to a circuit breaker, turn it off as well. With the use of s screwdriver, disconnect the wires found on the garbage disposal housing.

Step 2: With gloves on and a pair of pliers, remove the glass pieces from the grinder and place them safely inside a paper bag to dispose of it properly.

Remove the garbage disposal unit from the drain. Place your hand on the bottom of the unit and rotate it at around a quarter of a full rotation to dislodge the unit from the sink.

Step 3: From the sink, place the insinkerator unit upside down a a piece of cloth or cardboard. With a wrench or wooden stick or rod, remove the remaining glass pieces trapped within the grinder and gently rotate the grinder until all pieces are dislodged and you can rotate the grinder smoothly.

Step 4: Put the garbage disposal unit back and reconnect the wires you earlier disconnected from the housing. Plug in the unit, turn on the water from the faucet and switch it on to ensure the grinder and flywheel are operating smoothly.

Garbage Disposal Insinkerator Leaks.

Step 1: Locate where the problem is coming from by placing a newspaper under the garbage disposal. With a stopper placed on the opening of the disposal, turn on the water to fill in the sink. If there is a leak, you will notice that a part of the newspaper will get wet. When you remove the stopper and water leaks as the pipe is draining, there might also be a problem with the drain pipe.

Step 2: From the wall outlet under the sink, unplug the connection and if your garbage disposal insinkerator is connected to a circuit breaker, turn the circuit breaker off. Check if the disposal is loose by rotating it clockwise. If it is tightly secure, then your next step is to remove the garbage disposal from the sink but first, not completely.

Step 3: Turn the compression counterclockwise to disconnect the P-trap and remove the unit by rotating it at least a quarter of an inch clockwise while holding the bottom of the insinkerator. With a screwdriver, secure tightly the mounting screws and replace the disposal. Repeat step number 1 to check for leaks. If there is leaking, remove the disposal again and tighten the mounting screws.

Step 4: If the sink drain is not leaking, reconnect the P-trap. Cover the drain with a stopper and fill in the sink with water. Tighten the drain pipes with a set of pliers.

Garbage Disposal Insinkerator Noisy.

Step 1: Turn off the switch before doing any repair. With the wrench that came with the unit, crank the garbage disposal unit by inserting it at the bottom of the garbage disposal.

Step 2: Move the wrench back and forth up to a whole rotation. Continue working on the wrench until rotates in both directions.

Step 3: Get a flashlight and check the grinder if there is an object trapped in the chamber, if there is, remove it with a set of pliers. For objects that are not visible, you can use a magnet so metal objects can attach to it.

Step 4: Turn the garbage disposal insinkerator power back on and let running water flow. If the noise has disappeared, your disposal should be working correctly.

Waste King Garbage Disposal Troubleshooting

Waste King garbage disposal appliances run on permanent magnet motor that can spin at a high revolutions per minute (RPM) and have good horsepower. The devices include a removable splash guard and are safe for septic tanks. However, there are problems with Waste King disposers that you might encounter while using it. Here are troubleshooting tips that you can pick up:

It Hums But Does Not Work.

Most Waste King garbage disposal units have an opening at the bottom of their housing. If the shredding plate gets stuck, you can insert either an appropriate disposer wrench or a .25-inch Allen wrench into the bottom and wiggle the plate back and forth until it moves freely. If your unit does not have such an opening, then you can insert a broom handle into its drain opening, so you can wiggle the plate. If the plate is not stuck, and its motor still hums after freeing up the plate, this indicates a defective motor. Take note that the motor is not repairable, so it means you have to replace it.

Its Grinding Plate Is Stuck.

As already mentioned, this problem can be solved by inserting either the proper wrench or an Allen wrench into the opening at the bottom and wiggling the shredding plate back and forth until it moves freely. Aside from this, you can also turn the grinding plate manually to free it up. Through the opening at the bottom of the unit’s housing, you can insert an Allen wrench and turn the plate to clear the obstruction.

It Is Loud Or Noisy.

If your Waste King garbage disposal generates a loud noise, then check the shredding plate if it wiggles or wobbles up and down. Also, check the blades if they are stuck. Remember that if the problem is the motor, it means that you need to replace the entire unit, as the motor is not repairable.

It Is Leaking Water.

A leaking Waste King disposal means that its O-ring might be broken or torn. If this is the case, then you should replace it. Also, the splash guard is often part of the main gasket, so if your unit is leaking between it and the mounting flange, inspect the splash guard for damage and replace it. On some disposer models, this component, together with the stopper, is sold as a unit, which means that you might not be able to replace this part separately.

Maintenance Tips

In order to give your Waste King garbage disposal unit a longer life, you should perform maintenance tasks on it on a regular basis. You should always run plenty of cold water when it is in use and clean its splash guard and stopper once in a month, as this and the stopper are havens for bacteria. If you are having some difficulty with eliminating odor of this component, consider replacing it. Moreover, you should sharpen the disposer blades and deodorize the unit periodically using non-toxic and biodegradable cleaning pellets to get rid of odor naturally and keep your unit smelling fresh.

Replace Garbage Disposal Splash Guard

Does your garbage disposal unit spits waste at you? Well, this does not necessarily mean that you have to replace the entire unit—you can just install a new splash guard in about a few minutes. This part can definitely cause problems with the whole machine when it is torn or missing components. Also, a worn-out splash guard will not prevent food and water from coming back up when your garbage disposal is on. So, if this is your case, you can take a trip to your nearest hardware store and purchase a new one. Luckily for you, the splash guard rubber gaskets are mostly similar to any model of your specific brand of disposer.

Required Tools for this Project

You do not need any special tools when replacing your garbage disposal splash guard, and it might be the easiest DIY task that you can do for your home, though it might seem exhausting as you have remove all the stuff that is under your sink first. For this task, you will only need one particular tool, which is a flathead screwdriver. Also, you would need a stack of books. Of course, you should forget the required materials for this project, which are the new splash guard and wood shims. Avoid last-minute trips to the store by having all these things ready ahead of time, and you will be able to save time and avoid frustration.

Steps to Replacing the Splash Guard

Step 1: Disconnect The Disposer.
Jam the screwdriver into the unit’s locking ring and rotate it away from you. As for the books, the disposer will drop onto them, where you still need to support the unit with one hand to avoid tipping over. Before you begin, make sure the garbage disposal is shut off, as you would not want it to start while you are holding it even though you are not touching any electrical wire or its inside. If your garbage disposal unit is hardwired, you can begin by flipping off its circuit breaker, and if it plugs in, then unplug it. Then, you must remove the waste pipe connection, which is connected with a solid pipe and a gasket that is covered by a flange, which screws in on one side and is held on the other side by a tab. you can remove the screw holding the flange and pull the pipe to free it from the unit.

For you not needing to remove the dishwasher and the electrical wire in order to drop the disposer, it is best to have enough slack in the waste line that connects the two. Afterwards, you should make sure to check the unit if there is not anything that has fallen down inside it. Or, take it as an opportunity to get rid of debris that got into it over time.

Step 2: Replace The Splash Guard.
Take note that your garbage disposal unit is connected to the sink with a metal nut, which has dog ear flaps that your screwdriver will fit into. You can jam your screwdriver into these flaps and turn the nut counter-clockwise, threading on by a fourth of a turn. After you manage to drop the disposer down, you can now remove the old and worn-out rubber gasket to be replaced with the new one. When replacing the splash guard, grab its lower edge and then peel it up and off. Then, slip the new gasket on and push it down until it is properly set. The new splash guard would fit snuggly over the lip on the top of the unit.

Step 3: Reconnect The Disposer.
After you have installed the new splash guard, shove several wood shims between the bottom of the disposer and the books until the locking ring touches the sink flange. Then, rotate the ring to lock it in place. Re-install the drain line and make sure you perform a leak test before grinding away.

Remember that putting the garbage disposal back in place would require you to reverse the steps of removing it. This means that you have to hold the unit in place, thread on the metal nut with the dog ear flaps with your hand, use your screwdriver to make the nut snug and leak proof, insert the waste pipe back in place, and screw the flange in properly and tight. When you see that your leaks test is fine, you can now fire up your garbage disposal unit. However, it is best to check for leaks once more after you turn it on. The splash guard should last awhile now and should keep water and food out of your face.

Take note that the most difficult part of reinstalling the splash guard would be hoisting the disposal unit up and into place with only one of your hands, while trying to engage the locking ring with the other. But with proper techniques, you can properly work around this task.

Additional Tips

Take note that important installation and safety information is provided in your garbage disposals manual, which you can download from the manufacturer’s official website if it did not come with the package. Before you attempt to install its splash guard or any other component, it is best to first read and understand the instructions. By doing so, you will be happy to know that this home improvement project is not that difficult to perform. But if these simple tips on replacing your unit’s splash guard do not work for you because there are unexpected complications, do not hesitate to call on the experts to get the job done for you. This will ensure that you avoid worsening the problem that might lead to additional costs.

We hope that this article has helped you understand how to replace the splash guard and how it works. By following it and observing the dos and don’ts of the process, nothing can go wrong and your disposer will be up and running properly again in no time.

Stinky Garbage Disposal Remedy

One kitchen appliance that usually takes a beating is the garbage disposal. Aside from the possible problems you may encounter like stuck flywheel and leaks, food debris can be lodged into the disposal and can cause unpleasant odor. The stinky odor can be caused by spoiled food and bacteria in the blades and under the lid.

There are simple yet effective ways to fix the stinky smell coming from your garbage disposal and knowing you have options can help you select the perfect to get rid of the unpleasant odor. First, it is important to remember to clean your garbage disposal and to keep from throwing in food left-over and potato skins as well as banana peels, thinking the flywheel can grind and dissolve them. Ways to solve stinky garbage disposal problems.

1. Let Ice Cubes Do The Trick.

Aside from using ice cubes to remove the jam in your garbage disposal, pieces of ice cubes can also be used to remove the unpleasant odor caused by food debris. Throw in the ice cubes into the garbage disposal insinkerator and turn it one while water is running. These ice cubes are also effective in sharpening the impeller blades.

2. Use The Versatile Vinegar And Baking Soda Combination.

Prepare a cup of vinegar and a cup of baking soda. Next, turn on the garbage disposal and pour the baking soda followed by a cup of vinegar. Ensure to run cold water to help in dissolving the baking soda and loosening the food particles that have accumulated into the disposal. For a more effective way to do so, you can also mix vinegar with cold water and pour it slowly during the process.

3. Grind Lemons In The Garbage Disposal.

Lemons have a distinct odor and are acidic, making them effective in defeating or depleting the rancid odor that comes from the sink. By getting few pieces of lemon, divide them into small pieces and put them inside the garbage disposal. Aside from lemons, you can also use different citrus fruits like orange and fresh lime. Turn on the garbage disposal and let running water flow to neutralize the rancid smell and replace it with fresh and citrus scent.

4. Try Some Bleach.

Mix a part of mild bleach with water and pour it slowly onto the garbage disposal while leaving cold water running. This technique is not only effective to remove the unwanted smell but also help to remove the food particles that are trapped inside the disposal.

5. Clean The Garbage Disposal.

It is also important to keep the garbage disposal insinkerator clean. The easiest way to do this is to use a wire brush to clean the inside of the garbage disposal. You can also use an old toothbrush if you do not have available wire brush. Turning the power off is not enough to ensure safety. Unplug the unit and remove the garbage disposal unit before cleaning.

6. Use Environment Friendly Commercially Manufactured Products.

There are also available products in the market which you can use to solve odor problems. Check the instruction manual that came with your garbage disposal unit to know what cleaning products can be used.

Removing the stinky odor coming from your garbage disposal is easy by using these tips. But more than anything else, it is best to keep from throwing leftover food into the garbage disposal.

Stuck Flywheel Garbage Disposal

If you turn on your garbage disposal and hear a humming sound, there are two reasons behind this problem. Either the bearing of the disposal is damaged or you are in a stuck flywheel situation. Garbage disposals make it easier to keep your kitchen organized and clean but when they are acting up, they can be annoying.

Malfunctions in garbage disposals normally happen overtime because of the accumulation of food debris in the sink which then gets lodged in the flywheel. A DIY stuck flywheel troubleshooting can be done if you have the proper tools and know-how. Here are some tips to solve this stuck flywheel problem.

Tools Needed:

Pair of Pliers
Allen Wrench
1 x 2 Wood

Note: Do not test the garbage disposal for more than 10 seconds if it is not working properly and there is a humming sound.

Procedure

Step 1: Ensure that the garbage disposal is turned off. Depending on the kind of unit you have, you can simply unplug the garbage disposal from under the sink or if the power is connected to your home electrical system, turn off the circuit breaker connected to your garbage disposal before troubleshooting.

Step 2: Look for the hex hole. Using your fingers, locate the hole normally at the bottom of the disposal under the sink. Get the hex wrench and move it back and forth until it completes one revolution.

Step 3: Remove the object that has obstructed the disposal using a set of pliers. You can also insert a broom handle of a piece of wood into the drain to spin the grinder manually and loosen the object. Be careful not to use your hand to dislodge the object because the teeth of the grinder are sharp and you might injure your fingers.

Step 4: Turn on the water to completely dislodge the loosened object or small objects that have caused the stuck flywheel.

Step 5: To check if the garbage disposal is free from obstruction, turn on the circuit breaker or plug in the power under the sink. Turn on the power switch if the problem has been fixed. Ensure that there is running water going into the drain to ensure obstruction will be removed.

Impeller Blade Issues

If the problem is in the impeller blades, you need to remove them by loosening its screw found in the middle. Next, you have to disconnect any hoses connected to the flywheel and blades. If small objects or excess food particles have been lodged, remove them carefully from the impeller blades.

Check the instruction manual that came with the garbage disposal unit. If the blades can be sharpened, it might help to do so to ensure food particles will not obstruct the disposal. If not, it might be necessary to replace the blades.

If you have done all the steps above and the garbage disposal is not yet functioning and there is no humming sound either when you turn it on, try to reset the unit by pressing on the red reset button.

Badger Garbage Disposal Jammed

One insinkerator garbage disposal model is the Badger that comes in different horsepower levels. It is specifically designed for home applications and proven to be durable. However, like any other household appliance and device, maintenance is important to ensure it lasts longer. This is perhaps the most effective way to minimize problems in the future.

But should you encounter minor problems with your Badger garbage disposal, there are troubleshooting guides you can use. For issues like jammed disposal, here are some tips you will find helpful:

1. A Sign That Your Garbage Disposal Is Jammed Is a Humming Sound.
This noise can be heard when the Badger garbage disposal is turned on. First, you will need hex head drench tool to start working on your jammed Badger garbage disposal. If you don’t have one, head on to your local hardware store so you can start fixing your garbage disposal.

2. In Some Instances, What Happens Is a Sudden Stop Of The Motor While It Is In Operation.
The best thing to do is to turn off the garbage disposal and the running water. With the drench tool, insert it at the bottom of the garbage disposal. Crank the unit by moving the tool back and forth. You can now remove any object that had caused the problem. Resume disposal operation only after about five minutes. Also, press the reset button before doing so.

3. For Objects That Cannot Be Seen Even If You Use a Flashlight, You Will Need a Rod With a Magnet Attached To It.
Insert the tool into the grinder so metal and iron objects will attach to it and you can easily remove them. However, if a coin happens to be the culprit, magnet will not work. Instead, attach a duct tape with the sticky side outward to a pencil. Work your way into the garbage disposal and let the coin stick to the tape.

4. For Objects That Are Non-Metal But Are Small, One Trick You Can Do Is To Get Ice Cubes From Your Fridge And Load Them To Your Garbage Disposal.
Let running water flow and turn on the disposal. The ice cubes will keep the small objects within the grinder and grind them into pieces.

5. Another Way To Remove The Jam Is To Manually Spin The Grinding Mechanism To Cut Loose The Object Blocking It.
If you have a newer unit, you will be fortunate enough to have a drench tool with a hex head which you can use. With a mirror and a flashlight, check the bottom of the disposal. Once the mechanism is visible, rotate or move the mechanism with the hex head wrench that is appropriate in size.

6. If You Do Not Happen to Have a Hex Head Wrench Too, a Wooden Stick or a Broom Handle Can Come in Handy.
Loosen the mechanism by inserting the piece of wood or broom handle into the grinder and spin it. Do so in different directions up until the mechanism is working without problems. One thing to be cautious about though is to keep from using the wrench on the nut in the middle of the chamber. This will just aggravate the problem.

Garbage disposals often have tools for troubleshooting. With the above-mentioned tips, fixing a garbage disposal jam is possible.

Troubleshoot Garbage Disposal Insinkerator

With too much action going on in the kitchen, overtime, you will encounter problems with your garbage disposal insinkerator, from clog to leaks. In some situations, you might need to call a plumbing expert to solve the problem. But if you some handyman skills, there will be issues you can fix yourself. Here are some tips to manage garbage disposal insinkerator problems.

Garbage Disposal Does Not Turn On

If your garbage dispisola insinkerator will not turn on at all, this can be an electrical problem. Check if the unit is plugged in. If it is, you need to reset it by pressing the reset button located at the bottom of the unit. This should solve the problem. If not, you need to check your circuit breaker to see if it has tripped. But if these two steps do not fix the issue, check the power switch if it needs to be replaced. Remember to turn of the circuit breaker connected to the insinkerator before replacing the power switch. Your disposal should be working by this time. If not, you might need to invest in a new one.

Noisy Garbage Disposal Insinkerator

If there is noise when you turn on your insinkerator that sounds like a clicking of a machine gun or a rattling sound, chances are, there might be an object stuck inside. You can easily remove this with the use of a service wrench that comes with your unit. First, ensure that the power switch is shut. Get a flashlight, small pliers and wrench. You can find the hole at the bottom of the disposal. Use the wrench to remove the bottom cover. Once it is open, carefully inspect the grinder for any object that might be causing the noise, using the pliers. Replace the cover and turn on the unit. It should be running smoothly without any noise. However, if the annoying sound still persists, you might need to call the experts.

Garbage Disposal Leaks

There are several leak locations that can occur with the wear and tear of your garbage disposal but if you know what to do, troubleshooting them is easy. If the leak is at the discharge drainpipe, there are two possible reasons for this: worn our gasket and loose bolts. First, check if the bolts are tightened. If not, you can fix the problem by using a wrench to tighten the bolts. However, if there is still a leak, you might need to replace the gasket. Conversely, if the issue is the dishwasher hose, check if it needs to be replaced. If the leak is coming from the clamp, you need to tighten it.

Sink Flange Leak

If your garbage disposal is leaking from the sink flange, you might need to tighten the bolts. Also check if the putty needs to be replaced. If it does, remove the unit and push the sink flange towards the sink and put some putty to cover the gaps. Ensure you tighten all the bolts and reinstall the garbage disposal insinkerator. Check if the leak problem is fixed.

Troubleshooting your garbage disposal insinkerator is relatively easy if you have the right tools and the skills. However, DIY enthusiasts should also know when is the right time to call in experts to handle more complicated tasks.

Badger 5 Garbage Disposal Troubleshooting

As part of Insinkerator’s wide-ranging line of garbage disposers, the company positions the 1/2-horsepower Badger 5 as a basic model for household use, focusing on durability and consistent performance. However, no product is perfect, and like virtually any garbage disposal unit, the Badger 5 also needs a little extra attention from you from time to time. While preventive measures serve as the most efficient form of maintenance and troubleshooting, you can still turn to some troubleshooting methods that are recommended by the manufacturer before you call in the experts. From a clogged unit, leaks and slow-draining water, to unusual odor and noises, there are some information you can pick up to always keep your unit in good condition and fix a problem quickly to make it work properly again.

First Things First

If your Badger 5 garbage disposal unit is not working, first check if it will turn freely with the service wrench that came with its package. As you can see, each InSinkErator disposer is shipped with a Jam-Buster self-service wrench, which is silver colored and shaped like a small crank about 4 inches in length. If it will not turn freely using the wrench, your unit is probably clogged with something that should not be inside it in the first place.

Also, you should check to see if the reset button popped out, where you need to find out how to reset the unit’s overload protector. Know that the Badger 5 is equipped with a device called an overload protector, which will automatically turn the unit off when there is something wrong, like when it is jammed or running for a very long period of time. Making sure that the disposal’s switch is turned off, you can locate such a device under the sink and on the bottom part of the unit, facing the floor. It is a red square button that, when it has tripped, you will see the button dropped down about 5 millimeters or a quarter of an inch. You can try gently pressing it, and if it does not stay up, you must wait about 10 minutes to try it again. If the button does not stay in or if the unit requires you to repeatedly reset the overload protector, the unit might need servicing. You do not need to worry about the costs as the Badger 5 comes with a warranty to fix things up due to workmanship or material defect.

If the model you have is hard wired, then you can check for power at the fuse or breaker. If it is permanently connected to your home’s electrical system using permanent means, then it is more important to check the fuse or breaker. To be sure, switch the breaker off and on, as well as replace the fuse. If the unit still does not function, then the problem may be in the unit itself or in your electrical system, which similarly requires service. If the problem is with the disposer, then you will have the manufacturer test it in its service center, but if the problem is with your electrical system, then of course, you will be responsible for the testing and repairs.

If your disposer has a cord and there is power to it, it is best to find out how to get an authorized service center for troubleshooting. On the other hand, if there is no power to it, then again you have to check its circuit breaker or fuse.

After these initial checks are done, it is time to perform the most common troubleshooting work for the Badger 5 disposal unit.

Clean It Up.

Remember that an unclean garbage disposal that is full of build-up or debris can lead to everything from sluggish performance to weird odor. To give your Badger 5 a thorough clean, plug your sink, fill it with warm water about halfway and mix in some baking soda. Then, remove the sink stopper and switch the unit on until water is drained to free loose particles from the disposer. As for regular cleaning, make sure you always run cold water mixed with dish soap through the unit after you do your dishes. You can also feed an orange or a lemon into the unit to fight foul odor. You can also clean the unit and make it smelling fresh using astringent oils.

Get Rid Of The Obstructions Or Jams.

If your unit suddenly stops during operation, it may have a jam in it. Switch it off, cut off any running water and then insert the self-service wrench into the hole at the center of its bottom and work it back and forth until turning a complete revolution, which will manually crank the unit and free up debris. With the use of a flashlight and a pair of tongs (or an automotive finger gripper or even a bent hanger), remove any foreign objects from it. Then, let the machine cool down for about 5 minutes and press the rest button before you resume use.

More Tips and Preventive Measures

Often, a simple press of the reset button would solve issues with your Badger 5 garbage disposal. To help problems from occurring, avoid feeding it with seafood shells, plastic, glass, large bones, hot liquids (especially oils), metal and caustic drain cleaners. Turn on cold water before you run the unit, feed waste slowly and flush it with cold water for several seconds after you let it grind. Avoid turning it off until the grinding sound stops. Moreover, you can grind hard but small objects, such as ice and fruit pits, to create a scouring action in its chamber, which will help it run more smoothly.

If simple troubleshooting tasks do not solve your unit’s issues, then it is best to call in the experts to avoid further damaging it. You can schedule an in-home service with the manufacturer or authorized service center by turning to their official website. It is still best to be safe than risking to forcefully repair the unit yourself and incur costly damage.

Badger 1 Garbage Disposal Troubleshooting

The Badger 1 garbage disposal unit comes with a space-saving compact design and sports a heavy-duty motor. Like other models in the InSinkErator Badger Series, it is a functional and reliable choice when your primary concern is affordability. As you can see, it comes with an array of great features, including a galvanized steel construction, the 1/3 Horsepower Dura-Drive Induction Motor and the Quick Lock Sink Mount that allows for easy installation and replacement.

Now, like other garbage disposers, you will experience some problems with the Badger 1 along the way. To make sure that the unit lasts long, you should know some troubleshooting tips that will keep it up and running.

It Hums, But Does Not Work.

Like most garbage disposal units, the Badger 1 has an opening at the bottom of its housing. If you see that the shredding plate is stuck, you can insert a disposer wrench that came with the package (it is shaped like a little crank, about 4 inches long) or a ¼-inch Allen wrench into the bottom and then wiggle the plate back and forth until it moves freely. If your unit does not have an opening at the bottom, you can instead insert a broom handle into the opening of the drain to perform the wiggling maneuver. If the shredding plate is not stuck and the motor still hums after freeing up the plate, this indicates a defective or worn-out motor, which is not repairable, so you need to replace it.

In case the grinding plate is jammed, you can insert an Allen wrench into the opening at the bottom of its housing and turn the plate to make it clear of obstruction. If your unit does not have such an opening, you can do the same step with the broom handle stated above. If there is still a humming sound after the plate is freed up, or if it does not turn freely, then you might need to replace the entire disposer.

Its Grinding Plate Is Stuck.

As previously mentioned, you can insert the appropriate wrench into its bottom and wiggle the grinding plate back and forth until it moves freely. However, you can do it manually to get the plate clear of any debris. If this does not solve the problem, then the motor bearings may be defective. Through the bottom opening of the housing again, you can insert a disposer wrench or a compatible inch Allen wrench to free up the plate. If the problem persists, then one of the most possible causes is that the bearings are damaged. As these are parts of the disposer motor, which is not replaceable, it is high time that you get another garbage disposal unit.

It Is Generating a Very Loud Noise.

If your Badger 1 garbage disposal is producing a loud noise, then you should check its shredding plate. See if it wiggles or wobbles up and down or if its blades are stuck, which entails replacement of the unit.

It Leaks Water.

Your disposer would leak water when its sink flange gasket is torn. If this is the problem, you can just replace the gasket. Aside from this, make sure that the sink flange is tightened properly. Moreover, this problem can also be caused by torn or broken O-ring or splash guard, which you should replace if this is the case.

It Only Hums When The Reset Button Is Hit.

If your Badger 1 unit hums but does not grind, it could be that the device is jammed. Using its self-service wrench or your own standard ¼-inch Allen wrench, you can start troubleshooting this problem. First, you should see to it that the switch of the disposal unit is in the OFF position and make sure that water is not running during this procedure. Looking under the sink, you can locate the hole, at the center of the bottom of its housing. Insert the wrench into the hole, and while holding the tool up in the hole, try to make a complete revolution, where you should be able to turn the wrench freely, both clockwise and counter-clockwise. If you feel that there is resistance in both directions, work the wrench in a back and forth motion and you may use force if needed. You will be able to know that you are applying too much force if the entire unit starts to turn.

Once you are able to turn the wrench freely in a complete revolution in both directions, you can remove the tool from the hole. With the disposer still switched off, look down into the chamber, which you can view from the opening of the sink hole. Now, hold the black flaps back and look down into the chamber with a flashlight and check if there is anything that may still be binding or hindering the plate, or something that might have dislodged during the previous procedures.

Remember not to put your hands into the chamber and pay special attention to the area around the shredding disk’s outer edge. You will see that there is a small space between the floor—the flat surface of the shredding disk—and the wall of the unit. After you carefully checked the space, follow the circumference of the ring to try to see if there is anything that should not be there. If you do find a debris or obstruction, then retrieve it by using a pair of tongs or pliers. And again, do not put your hands inside the garbage disposal. After all these, you can now turn the faucet on and run water through for fifteen to twenty seconds and then turn the switch of the unit onto check if it is operating properly.

If the troubleshooting tips outlined in this article do not resolve the issue at hand, it might indicate that the unit may need to be serviced or replaced. Contact the professionals to take care of the matter for you and avoid costly problems.

Batch Feed vs Continuous Feed Garbage Disposal

When you are shopping for a garbage disposal unit for the first time, then there is a few things you have to consider. And if you are confused about this appliance overall, it is important to take a look at the basics to come up with the best decision. But before anything else, you should first know that there are 2 types of garbage disposers—the batch feed and continuous feed. Now, it is very important to know exactly which of these models would fit your requirements. You will have a very good idea by assessing their pros and cons.

Batch Feed Garbage Disposal

As the name implies, a batch feed garbage disposer will grind up waste in batches.

Pros

  • This unit comes with a stopper or cover, which means that you will not be left with a gaping hole for foreign bodies to fall into.
  • If you only want to get rid of only a small amount of waste, this is probably the best option of a disposer to you.
  • A batch feed disposer is much safer than its counterpart, as it requires you to fill its chamber and cover the hole before powering it on, eliminating the problem with jams if accidentally something is dropped into the unit that should not be there.

Cons

  • If you got larger amounts of waste in your household, then it will take you longer to get rid of it.
  • It might be tempting to fill the chamber with waste and save grinding until you will have spare time, but this can lead to potential health hazards because food will start to rot. This will attract unwanted insects and bacteria.

Continuous Feed Garbage Disposal

A continuous feed garbage disposer is designed to continue to run from the time it is switched on.

Pros

  • If you need to grind up a large amount of waste at home, this type of garbage disposer is possibly your best option. The reason for this is that you do not have to wait until its chamber is full before it will start to power up.
  • If you like to keep your kitchen tidy while you prepare food, you can just throw cooking waste into this disposal unit as you work.
  • This type of garbage disposal unit is usually cheaper than its counterpart, the batch feed model, which is why you often see more of it than the latter.

Cons

  • Safety can be an issue with a continuous feed garbage disposer, as its motor would continue to run as you put waste down the sink, which risks having unfortunate accidents with your fingers.
  • Another issue, though slight, is the water usage. As you can see, manufacturers recommend running cold water when using this model, otherwise you will see a significant increase of your bills.
  • All in all, the most important factors to consider when deciding which of these 2 types of garbage disposal unit you should choose are amount of waste, safety, and money. Now, it is up to you to decide which is best for you.