Why Does My Toilet Smell Like Sewer

A common problem that many households and commercial building managers complain is a foul smell emanating from their toilet. The sewer like smell comes immediately after use, though there are reports that some toilets reek like a sewer even when it has not been used. You would think it is a hygiene issue but on the contrary, it is sewer gas escaping through your toilet from the drain line. The smell is irritating, and it can cause the whole house to smell like a sewer.

Not only is the sewer smell unpleasant, but it is also unhealthy, and it can cause diseases and upsets since it contains bacteria and methane. The smell could lead to headaches and more severe ailments, and worse still, methane is combustible, and you could be staring at an impending fire in your property. If you start noticing sewer smells coming from your toilet, you had better start mitigating the issue as soon as possible to avoid paying huge plumbing and healthcare bills. In this guide, we look at why your toilet smells like a sewer, and what to do about it.

What Is the Course of the Sewer Smell?

This is a plumbing issue primarily caused by a faulty p-trap. This is the U-shaped pipe that holds water in it to provide a seal preventing sewer gases from going up in your toilet. Let us look at the problems arising with the p-trap that could cause the sewer gas to get into your toilet.

A Leaking P-Trap

If your p-trap leaks, it will not be able to hold enough water to make a proper seal. In this case, check for any leaks by looking for a pool of water behind your toilet. The water is not only a health hazard, but it could cause mold build up on your floor.
Infrequent Use

The toilets that are hardly used, the guest toilet, for example, will cause the evaporating of the water in the p-trap. This then causes the gases to seep into your toilet and consequentially, the whole house. Make sure that you flush the toilet at least once a week, and more frequently during the warm months of the year.

Blocked Vent Pipe

One of the crucial parts of a plumbing system in the modern era is the inclusion of a vent pipe. This pipe acts as the system’s air intake to feed air into the pipes. If the toilet’s vent pipe is blocked, it will force some of the sewer fumes to backtrack into your toilet, hence the foul sewer smell.

Loose or Broken Seal

The drainpipe attaches to the toilet through two different seals. If either one or both are loose or damaged, then the sewer smell will waft through your toilet easily.

Damaged Toilet

The reason for the foul sewer smell could be due to a damaged toilet after the aggressive use of the drain snake. This causes cracks around the bolts that hold down the toilet to the floor. The sewer gas penetrates through the cracks.

Call a Professional or Do It Yourself

With the volatile economic conditions, it is always better to take on the handiwork of your home if you have the skills and the time. However, some things such as dealing with the foul smells from your toilet are better left to the professionals with years of experience, proper training as well as the right tools for the job.

Calling a professional will save you money and time, allowing you to run your program as scheduled. Besides, untrained armatures may aggravate the situation and leave you with a severely damaged toilet. Here is what to look for in a professional plumber to fix the foul sewer smell in your toilet.
License and registration

This is the most crucial factor to check for when hiring a plumber. It shows that the authorities recognize their services. Go a step further and check their bond papers in case the problem worsens.


There are different kinds of plumbers specializing in the installation, maintenance, and repair of plumbing systems in various rooms in a home or commercial building. Ask them about their experience in handling bathroom and toilet plumbing as well as whether they have dealt with such a problem in the past.

Customer Testimonials

The best plumbers to call and handle the foul sewer smell emanating from your toilet, are those within your locality. Ask friends, family, and colleagues to recommend a plumber they have used in the past. This way, you will get a chance to ask about the quality of services of the various toilet and bathroom plumbers.

Do They Have a Working Website?

One of the requirements when doing business in the modern age is that companies and experts must have a website. It provides insight on how professional they are as well as the scope of the services they offer.

In conclusion, do not wallow in problems, when you could have it fixed in a few minutes or hours. Get in touch with a plumber at a time of your convenience to fix the foul smell.

Why Do My Pipes Vibrate When I Flush the Toilet

There are several reasons as to why your pipes vibrate whenever one flushes his/her toilet. Some of the major issues as to why you keep hearing that rattling sound could be.

Loose Pipes

In case you pipes are lose, they normally rattle whenever someone flushes the toilet or turns on a faucet. Visibly inspect the pipes to determine whether there is movement and if there is consider having them tightly fastened.

Water Pressure Issues

Another cause to vibrating pipes could be issues with your water pressure. When the water pressure is too high it causes pipes to vibrate and can even being about long term damage to them as well as other appliances. Normally, it is recommended that indoor water pressure should range between 40 – 60 pounds per square inch. To fix this pressure issue, consider adding a pressure regulating valve to the incoming water line to reduce pressure in case it is high.

Water Hammer

A water hammer at work could also be causing your pipes to vibrate. Water hammer is normally caused by valves closing very fast. When water flows through the pipes and the valves shut off quickly, water is forced to stop suddenly causing the hammer effect. To correct this problem, call a trusted plumber to help add a water hammer arrestor to the vibrating pipes. Also you could replace the toilet’s fill valves with slow-closing fill valves.

In case you have been experiencing the hammering effect for some time now and the problem keeps on worsening, the problem could be that there is an air chamber behind the walls connected to the pipes. Air chambers act as cushions against the hammering effects, however with time they might fill up with water rather than air. If this is the case, they need to be drained to make more room for air. By shutting the water valve and opening the taps and also flushing the toilets starting from the heist level to the lowest, the pipes could be easily drained. Once all the pipes have been drained, close the drain and turn the water valve back on.

Vibrating pipes could not only be aggravating but also damaging as it might cause the pipes to break because of the banging force. This can be an expensive and devastating to repair. Therefore it is of paramount importance to find a trusty plumber to help diagnose and fix the problem before more damages can be done.

Why Does Toilet Make Loud Noise When Flushed

When it comes to the toilet, most people are well aware of the mechanical functions that make it work, but very few people are aware of the noises that toilets make and what they mean. No, a noise doesn’t necessarily mean that something bad is happening, but it can mean that there are issues at play. This is why you need to be well aware of the kinds of noises that can happen when do you use the toilet, and what these precise noises mean can result in very different consequences depending on how far into the ownership of your toilet.

The Septic Tank Malfunctions

If you hear a billowy gurgle, this is most likely a septic tank issue. This type of noise is specific to the septic tank due to the congruous construction of the tank and the various parts of it that make it work from top to bottom. It’s important to note that this is only one part of the tank, and if you do try to engage and enter other parts of it whether yourself or using a plumber, it is possible to encounter other kinds of issue. But for the most part, it’s not a very common occurrence.

Faulty Piping Clasp

One of the most common issues that are rarely mentioned when it comes to strange noises is the possibility of a faulty piping clasp. This is a part of the toilet that fuses some of the outer pipes together and is usually used to hold the connecting unit from the septic tank to the rest of the main toilet. This is an area that can receive a lot of indirect water pressure with every flush, and it’s not uncommon to hear a noticeable sound when a flush is initiated. Once completed, it’s clear to see the consequences.

Other Reasons for Strange Noises

Sometimes, the reason your toilet makes a noise has nothing to do with the toilet itself. Remember, the toilet is just on the receiving end of your plumbing and water pressure. In other words, there are can be other factors that influence the sounds your toilet makes. This is very true if you live in an area where the water or plumbing is faulty, and as a result, it can sometimes affect the noises your toilet makes whenever you flush. Always investigate, and remember, don’t overreact just because of an unusual sound.

Why Does My Toilet Keep Flushing by Itself

One of the most perplexing plumbing issues has to do with the toilet when it’s flushing by itself. If you’re a homeowner or simply someone with a toilet that is flushing by itself, it could be the indication of a much more serious issue. Because of that, it’s very critical that you keep the following information in mind when trying to assess whether or not a toilet is actually properly flushing or not. Too many people assume that the reason a toilet flushes is due to the complications in the plumbing construction. This is actually not true.

When it comes to automatic flushing there are several possibilities, but without a doubt, it’s something that can easily be addressed without much issue at all. Should you doubt that this is true, you’ll also have to consult some others because overall, there should be no reason that this happen. There are plenty of complications in the code that might prevent people from assuming whatever happens due to the reasons outline in most plumbing manuals, but it’s usually a simple diagnosis, and similarly speaking, it’s usually a simple fix as well.

Faulty Flush Switch

When you press the switch on the toilet to make it flush, this is called the flush switch. This switch is there to engage the toilet into flushing whatever water is in the bowl. When this happens, the septic tanks flushes itself and the water pressure causes massive suction. However, sometimes, this switch can get too sensitive and begin flushing on its own. If your toilet is just blindly flushing without any reason at all, this usually means that the flush switch is faulty and needs to be engaged properly. It’s not uncommon that this happens for a lot of people, so if it’s something that you can think of, then you’re definitely at risk for this getting more serious. However, if you have a plumber or toilet tech take a look at the unit, they can most likely repair it and get it working again.

Imbalance in Water Pressure

Water pressure is something that you have to be very aware of when constructing a toilet or flush mechanic. This is something that plenty of people have trouble with, but rather than being at fault or uncomfortable, you can rest assured that this is a simple fix if you decide to make the effort necessary to repair everything that is broken.

Why is My Toilet Not Flushing All the Way

If a toilet is not flushing its content completely, it is not only gross but also annoying and wasteful of water. If your toilet isn’t flushing completely, it is most likely to be a because of the following;

The Water Level Is Too Low

Toilets require a lot of water to flush quickly and successfully. However, if the water levels are too low the bowl wouldn’t get enough water as it ought to. Manufacturers often leave a mark inside the tank to show how much water the tank should contain. Water level might be too low because some components in the tank might be misaligned preventing the tank from filling, and also some people have been noted to adjust the flapper to save on water.

Flapper Problems

Whenever a toilet is flushed, there is a chain in the cistern that lifts. Since it is attached to the flapper, when lifted, the chain allows all the water to drain from the tank to the bowl quickly. However, in case the flapper is damaged or old or the chain isn’t adjusted to an appropriate length water will be leaking out of the tank decreasing the level of water available for flushing.

Clogged Toilet, Or Drain Or Toilet Flange

If there is any clog anywhere in the system water will be prevented from completely flushing down the toilet. Depending on where it is and how significant it is you can either remove it or seek assistance from a professional.

Blocked Jet Holes

Jet hole are located just below the lip of a toilet bowl. When flushing the toilet, water pours from these holes into the bowl. Therefore in case they are clogged you will be losing a good amount of water which could prevent your toilet from completely flushing.

To determine this, there won’t be water streaming from the sides of the toilet bowl and if there is water will be coming down straight rather than diagonally.

Poor Drain Pipe Make

If you toilet has always been flushing incompletely, the problem could be probably be with the drainage pipe design or the way they were installed.

A toilet should always drain downwards for the water to quickly flow down the bowl, through the pipes into the sewer. However if your toilet doesn’t drain downwards, then you will be getting a pool of water stuck in the pipes and when you flush the water stalls.

These are the major causes of your toilet not being able to flush completely.

Why is My Toilet Making a Whistling Noise

When it comes to plumbing and other appliances, there is almost always going to be a noise of some kind involved. While this is very common with some appliances, you have to be aware that when it comes to plumbing, this is one of the most commonly damaged kinds of appliances in the household simply because there is a lot of ignorance surrounding these kinds of things. Rather than being in the dark regarding a lot of it, it is very important to be aware of the kinds of noises that can arrive when there is a high-pressure cavity.

A high-pressure cavity is undoubtedly one of the most common ways you can hear a strange noise, among those, a very shrill whistling noise. So if the toilet is making a whistling noise, here are some of the things you have to be aware of. Some of these occurrences are more potentially hazardous than others. For others, they are rather innocuous, but being on top of all them will ensure you can stay ahead of the battle.

Septic Tank Buildup

When it comes to using certain appliances, it’s very critical that you stay on top of those that are showing signs of high pressure. Pressure is very common in plumbing because as liquids and other objects navigate through the pipes and aqueducts, it’s not uncommon for sewage or other things to create a whistling sound when they are moved. If you ever hear whistling, that is a bad sign. Typically, whistling is an indicator that there is a severe level of pressure change, a level so high, that it very well could cause a pipe to burst. Rather than being ignorant of this, ensure you inspect the septic tank directly to ensure that there is actually no critical levels of buildup.

Waste Overflow

One thing people don’t realize is that when you flush waste of all kinds, there is an evaporation of those products. For example, most waste products decompose and create methane gas, which in small amounts is not a danger, but at very high levels, the gas can actually create flammable pressure build. because of this, it’s incredibly important that you monitor the levels of odor in addition to the sounds the toilet makes whenever it’s used. By understanding the difference between a particular set of sounds, you’ll ensure that you can reduce the chances of damage or catastrophic failure.

Why Does My Toilet Drain Slowly

When a toilet is in good shape, pressing down the flush handle will normally cause water to quickly flow down from the water tank to the bottle and down the drain line. It is important for water to move quickly because this action creates the suction pressure in the pipe sucking down the waste. However there are problems of slow flushing toilets. This inconvenience might drive one crazy as it most often leads to incomplete flushing.

Slow flushing might be as a result of problems with the water level in your tank, clogged pipe or toilet itself or accumulation of hard minerals or calcium. A sluggish toilet shouldn’t be left untreated as ignoring this problem may lead to total toilet clogging which is not only annoying but also dangerous.

Water Level in the Tank

This is most causative reason to slow flushing toilets. If the water level in the tank isn’t up to the required level your toilet’s flushing power will be poor. This is so because a high water level adds more force intensity which is mandatory for complete flushing. However if the water level in the tank is not up to the recommended level your bowl might not be clearly emptied. Ensure that the water level in your tank is sufficient by filling it to approximately a half inch below the overflow pipe.

Clogged Pipes

Drain buildup is another major reason to slow flushing toilets. To determine whether the drain is clogged, pour a gallon of water into the bowl swiftly; if the water level in the bowl rises quickly then there is a clogged problem somewhere. To fix this, use a dandy plunger to try and unclogging it and if it doesn’t work snake the line.

Mineral Buildup

If your toilet drain is clear and free and your tank is full, slow flushing might also be due to mineral build up in the jet holes of your toilet. Minerals such as calcium might be collecting in these jet holes every time one flashes the toilet. These mineral buildups reduce the flash power as they cause the pressure to become less and less powerful. To fix this use a mineral remover together with a metallic tool to clear out the holes. However if there isn’t significant buildup but your toilet still has flushing issue, call your trusted local plumber to check it out.

Remedies for Slow Flushing Toilets

1. Use a fitting plunger to plunge the toilet. This process is easy and in case the slow flushing was due to a partial blockage by probably waste, plunging will remove it. However in case the toilet is showing some other signs of blockage for example backing up, if plunging does not work use a toilet auger to clear the blockage.

2. If the toilet continues to flush slowly even after plunging, listen to gurgling sounds in nearby pipes. If you hear such sounds, then it means there is not sufficient amount of air in the pipes lines to enable water to flow freely. This might be because of debris clogging the vent pipe. Clear all the debris from the roof vent opening, after clearing the opening, use a garden hose to spray some water into the pipe. In case the water backs up, use a sewer auger to clear the vent.

3. Check the working mechanism of the toilet to make sure there is quick flow of water from the tank to the toilet bowl. Start at the flashing valve, open the tank and keep an eye on the flapper when flushing, the flapper should rise when the valve has been pushed down to an almost vertical position. In case it does not, it is probably preventing water from quickly flowing out of the tank. Consider shortening the chain holding it to the valve.

4. Remember the water level in the tank should be approximately half an inch below the overflow pipe when the tank is full. If the water is below that level then there won’t be complete flushing.

5. Clear the water inlet jet holes around the toilet rim. The holes might get blocked with mineral deposits from the water such as calcium more especially if your toilet is old or you are using hard water.

Things You Will Require

• Garden hose
• Plunger
• Ladder
• Sewer auger
• Toilet auger
• Paper clip


• In case the toilet is still showing signs of slow flushing even after you have tried these procedures, then something might be stuck in your toilet’s P-trap, something like a metal or even plastic toy and using a toilet auger hasn’t worked, you might pull the toilet to have the object removed.
• In case you have trees planted around the house and you have noticed the slow flushing problem worsening with time, this might be because roots might have grown into the sewer and this will require professional intervention.

Why Does the Toilet Make a Noise When Flushed

If your toilet is making noises when flushing you will be probably wondering what could be possibly wrong with it. Identifying the issue is the first step to getting tranquility and peace in your bathroom. You might need a plumber but then again it might be something you can fix yourself. So what is causing your toilet to make such noise? Below are three of the common things that cause a toilet to make noise when flashing.

A Dirty Ballcock

This is probably the most common cause of a noisy toilet. A dirty valve (ballcock) causes a toilet to make a loud foghorn-like noise when flushing. This shouldn’t however make one worry as it is easy to fix. After turning off your water supply, locate the ballcock and carefully remove any debris and dirt. Turn the water back on while checking for any leaks; the noise should be gone now. However if the noise is still there consider replacing the ballcock with a new one.

Loose Connection in the Cistern

In case the foghorn noise wasn’t fixed with a new ballcock or a cleaned one then there is probably a loose connection in the cistern. To identify, turn the water off first then take apart all the parts together with the valve. Take out the washer and place it back the other way round. Put back everything fastening them tightly. Switch on the water and try flushing to see if the problem has been fixed.

Bad/Old Washer

Old or bad washers cause toilets to hum and if your toilet is humming consider replacing it. If you separate the ball valve, inside you will see a washer; if it is looking old replace it and also replace the ball valve. This should fix the noise problem.

Problem with the Float Switch

Faulty float switch causes water to overflow from the cistern. Simply unscrew it and reassemble it back tightly, or replace it with a new one.

Vent Problems

If you still hear noises when flushing after trying all the above solutions, then the problem might be clogged vents. Unclog the vents to let out build up pressure.

Trusty Plumber

In case you have tried the above remedies and none seem to work or simply have no time to do so, it is probably a good idea to call your local trusted plumber. They can fix the problem effectively and fast as they have years of experience and they can easily identify the problem.

Why Does My Toilet Cistern Keeps Running

Whether it is the sound of water constantly running or cycling on and off, mysteries of a continuously running toilet can drive someone nuts. So what might be causing your toilet to continue running even after you are done?

Chain Problems

Issues with the chain might cause a toilet to constantly run. If the chain is short it might be pulling the flapper even when the flapper is at rest and also if it is too long it might interfere with the closing mechanism of the flapper. Therefore check the connection where the rubber flapper and the flapper lever are attached to. Jiggle the level and see how the chain moves. To fix this, consider replacing the chain with another chain that has proper length.

Broken, Warped or Dirty Flapper

With time, a flapper can break, become dirty or even start to leak. To identify the problem, flush the toilet first to drain all the water from the tank. unscrew the flapper from the base and bring it to the surface to closely examine it. Turn it over and look for any discoloration, signs of warping, breaks on the rubber or plastic or for any mineral deposits.

Try cleaning any build up that might be preventing it from properly closing. In case there is a problem with the actual flapper consider replacing it entirely. They are quite affordable. To replace, simply detach the old one and attach the new one then hook it back and try flushing.

Perhaps a point to note, when purchasing a flapper, makes sure you get one that fits the chain on the thick center section and not the thin outer part.

Float Position

After a toilet has been flushed, the tank automatically stops filling when the water has reached just below the over flow pipe. However if the water keeps running then this is an indication that the float is way high. To identify this, try flushing the toilet and note where the water stops at.

The easiest way to fixing this is by bending the rod connecting the pump and the float so that the float is lowered which will consequently signal the pump to switch off sooner. In case the rod doesn’t bend, call the plumber.

In conclusion in case you hear some noise from your toilet, don’t go calling the plumber. Some problems are quite easy to fix by yourself, just get in there and poke around. Chances are you can identify the problem and fix it which will save you money!

Why Does My Toilet Gurgle

When it comes to toilets, they’re one of the most misunderstood appliances in the entire home. Because of the fact they are considered rather unsanitary, this causes a lot of confusion as far as what happens when they malfunction. Rather than being intimidated or scared by any strange noises, it’s important to understand that there is a reason behind everything.

When it comes to the toilet, one of the most common issues that you’ll encounter when flushing is a loud noise when a flush is made. While there are a number of reasons for why something like this can happen, it’s important to stay aware and be fully cognizant of what can happen when you fail to stay abreast of the strange noises a toilet can generate, but once you’re aware of it all, you can execute accordingly.

Septic Backup

When it comes to the septic tank, it’s one of the most important parts of the toilet. While most people are concerned with what they can see, they are unaware that the gurgling noise is probably backup from the septic tank. The septic tank plays a valuable role in ensuring the toilet can function properly. Without a properly functioning tank, there is going to be a whole host of other issues at play.

Because of this fact, it’s important to realize that while everything is going to accordingly plan, this might throw a proverbial wrench into your plans if you’re hoping for this tank to not cause any issues. This is precisely why so many other people are unaware of the things going on when their tank is normally functioning. While you might be fully aware of it, you might not notice the fact that the tank is actually short circuiting, so to speak. However, it is possible to fix this issue should it ever happen again.

Clearing Out Septic Backup

When it comes to clearing out the backup that can sometimes form inside of the septic tank, you have to be aware that most of the time it’s going to take an experienced plumber to actually deal with this issue. Rather than it being something that an inexperienced individual is going to deal with, this is something you can solve yourself. It can take a bit of time, but once the backup inside of the tank is cleared out, you should be able to make things work as if it never happened.